We are going to make use of the above-mentioned and begin with power. It means the produced or consumed energy and the most common units of measure to express it are:<\/p>\n
\u2022 Btu\/h;<\/p>\n
\u2022 kcal\/h;<\/p>\n
\u2022 W.<\/p>\n
The acronym Btu comes from British Thermal Unit, symbolizing the quantity of energy required to raise the temperature of one pound (0,45 kg) of water by one degree Fahrenheit, under constant pressure of 1 atmosphere.<\/p>\n
Kcal\/h expresses kilocalories per hour. One kilocalorie is equivalent to 1,000 calories and is defined as the exchanged heat when the mass of one gram of water passes from 14.5\u00b0C to 15.5\u00b0C.<\/p>\n
In turn, the Watt (W) is the most common unit of power, being adopted in the International System of Units.<\/p>\n
\u00a0Efficiency<\/strong><\/p>\n The units used to measure the efficiency of a refrigeration system are:<\/p>\n \u2022 W\/W (Watt for Watt);<\/p>\n \u2022 Btu\/Wh (Btu for Watt hour);<\/p>\n \u2022 kcal\/Wh (kilocalorie for Watt hour).<\/p>\n What it is important to know:<\/p>\n \u2022 1 W\/W equals 3.412 Btu\/h and 0.859 kcal\/h;<\/p>\n \u2022 1 Btu\/h equals 0.293 W\/W and 0.252kcal\/Wh;<\/p>\n \u2022 1 kcal\/Wh equals 1.162 W\/W and 3.965 Btu\/h.<\/p>\n Pressure<\/strong><\/p>\n When we speak of pressure, we are here referring to the absolute pressure, which measures the difference of the ideal or absolute vacuum and, therefore, is not altered by climate or altitude. The absolute pressure differs from the manometric or relative pressure, which is the difference between the ambient (atmospheric) pressure and the pressure measured. The manometric pressure undergoes alterations when submitted to the influences of climate (which can represent a difference of +\/- 30 mbar) and altitude from sea level (up to 200 mbar of difference).<\/p>\n There are several units of measure for pressure, such as bar (and the respective derivatives such as the above-mentioned mbar), atmosphere (atm), technical atmosphere (at), Pascal (Pa), Torricelli (Torr), mercury millimeter (mmHg), mercury inch (inHg), water inch (inH2O), pound per square inch (psi) and pound per square meter (psf).<\/p>\n Temperature<\/strong><\/p>\n For temperature, mainly the scales Celsius (\u00b0C), Fahrenheit (\u00b0F) and kelvin (K) are used.<\/p>\n To formula below can be used to convert degrees Celsius into degrees Fahrenheit, where C means the temperature in degrees Celsius and F is the temperature in degrees Fahrenheit:<\/p>\n C x 1.8 + 32 = F<\/strong><\/p>\n For instance, if the temperature in Celsius is 20o, the calculation of the temperature in Fahrenheit will be done by multiplying 20 by 1.8, which gives 36. Adding 32, one obtains 68, which is the temperature in oF equivalent to 20oC.<\/p>\n To convert degrees Fahrenheit into degrees Celsius, subtract 32 and divide by 1.8, in accordance with the formula below:<\/p>\n (F \u2212 32) \u00f7 1.8 = C<\/strong><\/p>\n To convert degrees Celsius into kelvin, just add 273.5. If the temperature is 20o C, the equivalent in kelvin will be 293.5.<\/p>\n It is not possible to convert a temperature Fahrenheit directly into kelvin. To make this conversion, first it is necessary to convert the temperature in degrees Fahrenheit into Celsius.<\/p>\n It is very easy to convert kelvin into Celsius, with the calculation below:<\/p>\n \u00baC = K \u2013 273<\/strong><\/p>\n To convert Kelvin into Fahrenheit, the formula is:<\/p>\n 1.8 x (K \u2013 273) + 32 = F<\/strong><\/p>\n The table below shows the values in the different scales for three situations.<\/p>\n \u00a0Other units<\/strong><\/p>\n In everything that is measurable, there are units created specifically to facilitate the comparison and which, with familiarity, are important references for us all. \u00a0It is the case of several other physical values, used by professionals of refrigeration, both in their work and in their day-to-day:<\/p>\n \u2022 Voltage, measured in volts (V);<\/p>\n \u2022 Intensity of electrical current, having as unit of measure the Ampere;<\/p>\n \u2022 Electric resistance, measured in Ohms;<\/p>\n \u2022 Capacitance, of which the unit of measure is the faraday (F);<\/p>\n \u2022 Length, with units of measure such as meter (m), centimeter (cm), millimeter (mm), inch (in);<\/p>\n \u2022 Area, with units of measure such as square kilometer (km2), square meter (m2), square centimeter (cm2), hectare, etc.;<\/p>\n \u2022 Mass (weight), with units of measure such as ton (t), kilogram (kg) and gram (g);<\/p>\n \u2022 Volume, with units of measure such as cubic meter (m3) or liter.<\/p>\n Several other physical values and their respective units of measure could be mentioned here, but our aim is not to make a full list, but to give examples with the most well-known ones.<\/p>\n It is important to emphasize also that the main units of measure (for instance, calorie or bar), have derivatives. These derived names are identified by prefixes, which indicate how much more or less they represent than the main unit of measure. The table below helps to understand this, by showing what the prefixes such as micro, milli, kilo, mega and others, which are widely used, mean.<\/p>\n To finish, we remind you of something very useful in facilitating the conversions of units of measure: the Toolbox APP, developed by Embraco and available for download free of charge, has a tool which calculates it for you in a quick and simple way.<\/p>\n If you have not downloaded yet, click here<\/a> <\/span>to download for Android or here<\/a> <\/span>to download it for iOS.<\/p>\n","protected":false},"excerpt":{"rendered":" The units of measure are means of quantifying a physical value (such as temperature, pressure, volume, mass, length and several others) and those working with refrigeration are constantly dealing with them. Therefore, it is important to know them, understanding what they indicate and how to use them. Another reason for knowing it well is that […]<\/p>\n","protected":false},"author":1,"featured_media":5811,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[49],"tags":[],"acf":[],"yoast_head":"\n![](\"https:\/\/refrigerationclub.com\/pt-br\/wp-content\/uploads\/sites\/3\/2018\/10\/CONVERSION-TABLE-POWER.png\")
<\/span><\/p>\n![](\"https:\/\/refrigerationclub.com\/pt-br\/wp-content\/uploads\/sites\/3\/2018\/10\/THE-DIFFERENT-SCALES.png\")
<\/p>\n![](\"https:\/\/refrigerationclub.com\/pt-br\/wp-content\/uploads\/sites\/3\/2018\/10\/UNDERSTAND-THE-MAIN-PREFIXES-USED-IN-UNITS-OF-MEASURE.png\")
<\/p>\n